Java Parser First Start Guide

From Wiki Knowledge Base | Teltonika Mobility

Step 1: To open parser Software you will need to install: Java
Step 2: Open parser Software. Click the link below to download Teltonika Parser / TCP & UDP Listener / Codec Java source code for protocol integration to your server

Step 3: Once opened, select TCP (1) or UDP (2) depending on the configuration done on the device. Type in the port number (3) that you have opened on the router in the "Port" section. After adding the port, press the "Listen" button (4).

Step 4: Once button “Listen” is selected, the software will start accepting data sent by the devices. Data received is stored in the session LOG files, which are found by clicking "Open Log" button (5).

Java parser3.jpg

Step 5: Once you received data from the device, you can push the "Stop" button (6) and copy data that you want to decode and go to "Parser" (7).

Java parser4.jpg

Step 6: Paste your data in an appropriate area and select which data protocol (8) and push the "Parse" button (9). You will receive decode data.

Java parser5.jpg

Step 7: AVL ID are shown in photo below, to find the required AVL ID please visit AVL ID list for the specific Mobility device: TFT100 | TST100 | GH5200 | TMT250 | TAT100.

  • Full AVL ID list can be found here

Java parser6.jpg