Template:TMT250 Mounting recommendations

From Wiki Knowledge Base | Teltonika Mobility

Precautions

Bw switch.png Operate the device in suitable conditions

Do not use the device where mobile connectivity is forbidden.

Bw car.png Road safety first

Comply with local traffic laws, always hold your hands on a steering wheel when using a device. Your safety is of utmost importance when you drive.

Bw emi.png Interference

All wireless devices are sensitive to electromagnetic interference, as a result wireless devices affect the performance of each other.

Bw hospital.png Limit the use of device in hospitals

Please follow all restrictions. Turn off the device in the vicinity of medical devices when required.

Bw vehicle.png Limit the use of device in vehicles

Please follow all restrictions. Wireless devices can interfere with other electronic equipment in vehicles.

Bw petrol.png Be cautious near flammable materials and liquids
Bw explosive.png Charging precautions

SELV LPS chargers, personal computers or laptops that device will be connected to must comply with the requirements of IEC 60950:2005 standard.

Yb nb.png Use only original batteries

Using uncertified manufacturer or different type batteries may cause an explosion.

Yb nb.png Use batteries safely

Protect batteries from moisture. Place them in a cool and dry place when storing. Avoid extensive operation at high temperatures. Do not attempt charging battery directly from the electrical mains. All utilised batteries shall comply with IEC 62133.

Yb nb.png Power supplies

Power supply circuits used to charge the device connection must have safeguards, which prevent power leakage, short circuits or incorrect electrical grounding. Any used switches ought to be installed in a readily accessible location. Power must be uninterrupted and the distance between the contacts must be 3 mm or larger.

Yb nb.png Remove device safely

Device must be disconnected from computer or charger by unplugging the magnetic USB cable from the device.

Yb nb.png Other

In order to prevent device from mechanical damage it is advisable to transport it in a shock–resistant packaging. If device stopped working properly regardless of the settings only a qualified specialist can help. It is recommended to contact your local seller or your UAB Teltonika manager in such a case.

Yb nb.png Use the right screwdriver

In order to prevent device's cover from mechanical damage it is recommended to use screwdriver, which is included in the package. Do not use electrical screwdrivers.