Difference between revisions of "GH5200 Auto Geofence settings"

From Wiki Knowledge Base | Teltonika Mobility
(Created page with "{{Template:FMB Auto Geofence settings |model=GH5200 |pic_autogeofence=right |deact_auto= |text_din= |txt_settings=''Activation timeout'' is n...")
 
Line 1: Line 1:
{{Template:FMB Auto Geofence settings
+
<div class="split right">
|model=GH5200
+
    [[Image:GH5200 autogeofence.jpg|right]]
|pic_autogeofence=[[Image:Tmt250 autogeofence.png|right]]
+
</div>
|deact_auto=
+
 
|text_din=
+
<div class="split left">
|txt_settings=''Activation timeout'' is not configurable via configurator, by default 60 second value is used. Scenario can be activated through a SMS/GPRS command or by a configured button and can be disabled by SMS/GPRS, button or call. To disable scenario with a call, configure ''Incoming Call Settings'' to <span style=color:#F6A83E>Auto Geofence Off</span> and set authorized numbers if such are used. }}
+
    <span>
 +
''AutoGeofence'' is based on the last known position after the movement has stopped. You can be notified using this function if your device is taken away. The shape and size of Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message. AutoGeofencing options can be configured by following parameters as depicted in the right hand side figure: ''Activation timeout'' defines the delay between the creation of AutoGeofence within set ''Radius'' value around device's most recent position and when the ignition is off. Activation timeout is not configurable via configurator, by default 60 second value is used. Scenario can be activated through a SMS/GPRS command or by a configured button and can be disabled by SMS/GPRS, button or call. To disable scenario with a call, configure ''Incoming Call Settings'' to '''Auto Geofence Off''' and set authorized numbers if such are used. Note that AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. Event generation can take place on Geofence '''Entrance''', '''Exit''' or On '''Both'''. ''Eventual Records'' is used to enable or disable ''Eventual Records'' functionality.
 +
    </span>
 +
</div>
 +
 
 
[[Category:GH5200 Configuration]]
 
[[Category:GH5200 Configuration]]

Revision as of 15:11, 24 January 2020

Main Page > Personal Trackers > GH5200 > GH5200 Configuration > GH5200 Auto Geofence settings
   

AutoGeofence is based on the last known position after the movement has stopped. You can be notified using this function if your device is taken away. The shape and size of Geofence zones are set by parameters. It is possible to state whether entering or leaving the geofence triggers an asynchronous message. AutoGeofencing options can be configured by following parameters as depicted in the right hand side figure: Activation timeout defines the delay between the creation of AutoGeofence within set Radius value around device's most recent position and when the ignition is off. Activation timeout is not configurable via configurator, by default 60 second value is used. Scenario can be activated through a SMS/GPRS command or by a configured button and can be disabled by SMS/GPRS, button or call. To disable scenario with a call, configure Incoming Call Settings to Auto Geofence Off and set authorized numbers if such are used. Note that AutoGeofencing does not require entering coordinates, instead it requires GPS visibility. Event generation can take place on Geofence Entrance, Exit or On Both. Eventual Records is used to enable or disable Eventual Records functionality.