Difference between revisions of "TMT250 User interface"

From Wiki Knowledge Base | Teltonika Mobility
m
 
(25 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
Indication is configurable in User Settings via configurator or via SMS/GPRS parameter ID.
+
__TOC__
−
Indication works like this. Each 100 ms FW checks if any indication is enabled and triggered. If indication is triggered, then FW starts indicating. If other scenario wants to indicate on the same indication source, then it has to wait while active indication scenario finishes indicating. User can configure each indication like shown in the picture above.
 
−
User can enable or disable indication, configure in which sleep mode indication can run, configure LED, Vibro, Period, Indication On, Off and how many times to repeat On/Off cycle. When period is set to 0, then indication will start immediately to indicate with configured LED and use vibration, if it is enabled. Period only works for scenarios that have type “Periodic”. Indication will turn on LED and Vibro for configured ON time, then turns off LED and Vibro and waits for configured OFF timeout. When Off timeout expires, then device checks into Repeat configuration, if it is higher then 0, then indication repeats On/Off cycle, if it is 0, then indication is finished. When indication is periodic and On parameter is set to 0, then LED and vibro will be set ON and will be set OFF only when indication will be canceled. Only Alarm and Power Key Pressed, Device Off indications can take over control of that LED and Vibro.
 
  
−
{{{status_picture|[[Image:Tmt250_user_interface.png|800px|none]]}}}
+
 
 +
'''Indication''' is configurable in '''User Interface''' tab of configurator or via '''SMS/GPRS parameter ID'''. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source ('''LED''' or '''Vibration''') then the active indicating scenario needs to be finished first (with exception of ''Alarm'' and ''Device Off'' scenarios, which can override the control of indication sources). '''Period''' setting is indicative of ''Periodic'' scenarios and if ''Period'' is set to '''0''' the indication will take place '''immediately'''. When indication is periodic and ''On'' parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on '''LED''' and/or '''Vibration''' for a configured '''On''' duration and then keep them off for a configured '''Off''' period of time. In case the configured ''Repeat'' value is higher than 0 the device continues a periodic on/off cycle. '''Enable In Sleep''' parameter will let the indication work while device is sleeping.
 +
 
 +
==GSM Indications==
 +
[[Image:TMT250 GSM Indication.PNG]]
  
 
{| class="wikitable"
 
{| class="wikitable"
 
|+
 
|+
−
! style="width: 200px; background: black; color: white;" | Name
+
! style="width: 190px; background: black; color: white;" | Name
−
! style="width: 200px; background: black; color: white;" | Type
+
! style="width: 600px; background: black; color: white;" | Meaning
−
! style="width: 200px; background: black; color: white;" | Trigger
 
 
|-
 
|-
 
! style="text-align: left; vertical-align: top;" | GSM Error
 
! style="text-align: left; vertical-align: top;" | GSM Error
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top;" | SIM is not inserted, failed to connect to GSM operator or GSM signal is being jammed
−
| style="text-align: left; vertical-align: top;" | When SIM not inserted, is blocked, failed to connect to operator or jammed
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | GSM Signal Established
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top;" | Device successfully registered to GSM network
−
| style="text-align: left; vertical-align: top;" | When trying to register to GSM network
+
|-
 +
! style="text-align: left; vertical-align: top;" | SMS Send/Receive
 +
| style="text-align: left; vertical-align: top;" | SMS is received or sent
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Incoming Call
 +
| style="text-align: left; vertical-align: top;" | Device notices incoming call
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Remote Connection
 +
| style="text-align: left; vertical-align: top;" | Device establishes connection with the server
 +
|-
 +
|}
 +
 
 +
==GNSS Indications==
 +
[[Image:TMT250 GNSS Indication.PNG]]
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 190px; background: black; color: white;" | Name
 +
! style="width: 600px; background: black; color: white;" | Meaning
 +
|-
 +
! style="text-align: left; vertical-align: top;" | No GPS Fix
 +
| style="text-align: left; vertical-align: top;" | Device searches for valid GPS fix
 +
|-
 +
! style="text-align: left; vertical-align: top;" | GPS Fix
 +
| style="text-align: left; vertical-align: top;" | Device has valid GPS fix
 +
|-
 +
|}
 +
 
 +
==Event Indications==
 +
[[Image:TMT250 Event Indication.PNG]]
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 190px; background: black; color: white;" | Name
 +
! style="width: 650px; background: black; color: white;" | Meaning
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Event
 +
| style="text-align: left; vertical-align: top;" | Eventual record is saved
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Panic Event
 +
| style="text-align: left; vertical-align: top;" | Panic record is saved
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Device Off
 +
| style="text-align: left; vertical-align: top;" | Device is turning off
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Device On
 +
| style="text-align: left; vertical-align: top;" | Device is turning on
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Pre Alarm
 +
| style="text-align: left; vertical-align: top;" | Indication when Man-down or No Movement event functionality starts counting timeout till event
 +
|-
 +
! style="text-align: left; vertical-align: top;" | I Am Alive
 +
| style="text-align: left; vertical-align: top;" | Periodical indication that device is on
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Sleep Mode
 +
| style="text-align: left; vertical-align: top;" | Device is in sleep mode
 +
|-
 +
|}
 +
 
 +
==Battery Indications==
 +
[[Image:TMT250 Battery Indication.PNG]]
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 190px; background: black; color: white;" | Name
 +
! style="width: 600px; background: black; color: white;" | Meaning
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Charging
 +
| style="text-align: left; vertical-align: top;" | Device is charging
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Fully Charged
 +
| style="text-align: left; vertical-align: top;" | Device is fully charged
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Charging Error
 +
| style="text-align: left; vertical-align: top;" | An error occurred while charging
 +
|-
 +
! style="text-align: left; vertical-align: top;" | Battery Low
 +
| style="text-align: left; vertical-align: top;" | Device battery is low
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
|}
−
| style="text-align: left; vertical-align: top;" | One Off
+
 
−
| style="text-align: left; vertical-align: top;" | When SMS is received or sent
+
==Keyboard Indications==
 +
[[Image:TMT250 Keyboard Indication.PNG]]
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 230px; background: black; color: white;" | Name
 +
! style="width: 600px; background: black; color: white;" | Meaning
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Alarm Key Pressed
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top;" | Alarm button is pressed and held down
−
| style="text-align: left; vertical-align: top;" | When outgoing call is in process
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Alarm Key Action Activated
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top;" | Configured functionality was activated by pressed Alarm button
−
| style="text-align: left; vertical-align: top;" | When device is connected to server
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Alarm Key Action Deactivated
−
| style="text-align: left; vertical-align: top;" | One Off
+
| style="text-align: left; vertical-align: top;" | Configured functionality was deactivated by pressed Alarm button
−
| style="text-align: left; vertical-align: top;" | When eventual record is saved
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Power Key Pressed
−
| style="text-align: left; vertical-align: top;" | One Off
+
| style="text-align: left; vertical-align: top;" | Power button is pressed and held down
−
| style="text-align: left; vertical-align: top;" | When panic record is saved
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Power Key Action Activated
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top;" | Configured functionality was activated by pressed Power button
−
| style="text-align: left; vertical-align: top;" | When device searches  valid GPS fix
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Power Key Action Deactivated
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top;" | Configured functionality was deactivated by pressed Power button
−
| style="text-align: left; vertical-align: top;" | When device has valid GPS fix
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
|}
−
| style="text-align: left; vertical-align: top;" | One Off
+
 
−
| style="text-align: left; vertical-align: top;" | When device is turning off
+
==Default Configuration LED indications==
 +
 
 +
{| class="wikitable"
 +
|+
 +
! style="width: 190px; background: black; color: white;" | Name
 +
! style="width: 300px; background: black; color: white;" | LED, Color & Additional indication
 
|-
 
|-
 
! style="text-align: left; vertical-align: top;" | GSM Error
 
! style="text-align: left; vertical-align: top;" | GSM Error
−
| style="text-align: left; vertical-align: top;" | One Off
+
| style="text-align: left; vertical-align: top; color: red;" | GSM
−
| style="text-align: left; vertical-align: top;" | When device turns on
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | No GPS Fix
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: red;" | GNSS
−
| style="text-align: left; vertical-align: top;" | When alarm button is pressed and hold
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | GPS Fix
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: green" | GNSS
−
| style="text-align: left; vertical-align: top;" | When power button is pressed and hold
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Device Off
−
| style="text-align: left; vertical-align: top;" | One Off
+
| style="text-align: left; vertical-align: top; color: red" | Battery, <span style="color:green;">'''Vibration'''</span>
−
| style="text-align: left; vertical-align: top;" | Button was triggered with configured  function to activate functionality
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Device On
−
| style="text-align: left; vertical-align: top;" | One Off
+
| style="text-align: left; vertical-align: top; color: green" | Battery, '''Vibration'''
−
| style="text-align: left; vertical-align: top;" | Button was triggered with configured function to deactivate functionality
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | I Am Alive
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: green" | GNSS
−
| style="text-align: left; vertical-align: top;" | When device is charging
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Charging
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: green" | Battery
−
| style="text-align: left; vertical-align: top;" | When device is fully charged
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Fully Charged
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: green" | Battery
−
| style="text-align: left; vertical-align: top;" | When ManDown functionality starts counting timeout til event
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Charging Error
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: red" | Battery
−
| style="text-align: left; vertical-align: top;" | When device is in sleep mode
 
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | GSM Error
+
! style="text-align: left; vertical-align: top;" | Battery Low
−
| style="text-align: left; vertical-align: top;" | Periodic
+
| style="text-align: left; vertical-align: top; color: red" | Battery
−
| style="text-align: left; vertical-align: top;" | When configured period passes
 
 
|-
 
|-
 
|}
 
|}
 +
 +
'''Note!''' three LED colors are available - ''Green'', ''Red'' and ''Blue''. Indications are fully customizable depending on the user needs.
 +
[[Category:TMT250 Configuration]]

Latest revision as of 16:38, 24 February 2020

Main Page > Personal Trackers > TMT250 > TMT250 Configuration > TMT250 User interface


Indication is configurable in User Interface tab of configurator or via SMS/GPRS parameter ID. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source (LED or Vibration) then the active indicating scenario needs to be finished first (with exception of Alarm and Device Off scenarios, which can override the control of indication sources). Period setting is indicative of Periodic scenarios and if Period is set to 0 the indication will take place immediately. When indication is periodic and On parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on LED and/or Vibration for a configured On duration and then keep them off for a configured Off period of time. In case the configured Repeat value is higher than 0 the device continues a periodic on/off cycle. Enable In Sleep parameter will let the indication work while device is sleeping.

GSM Indications

TMT250 GSM Indication.PNG

Name Meaning
GSM Error SIM is not inserted, failed to connect to GSM operator or GSM signal is being jammed
GSM Signal Established Device successfully registered to GSM network
SMS Send/Receive SMS is received or sent
Incoming Call Device notices incoming call
Remote Connection Device establishes connection with the server

GNSS Indications

TMT250 GNSS Indication.PNG

Name Meaning
No GPS Fix Device searches for valid GPS fix
GPS Fix Device has valid GPS fix

Event Indications

TMT250 Event Indication.PNG

Name Meaning
Event Eventual record is saved
Panic Event Panic record is saved
Device Off Device is turning off
Device On Device is turning on
Pre Alarm Indication when Man-down or No Movement event functionality starts counting timeout till event
I Am Alive Periodical indication that device is on
Sleep Mode Device is in sleep mode

Battery Indications

TMT250 Battery Indication.PNG

Name Meaning
Charging Device is charging
Fully Charged Device is fully charged
Charging Error An error occurred while charging
Battery Low Device battery is low

Keyboard Indications

TMT250 Keyboard Indication.PNG

Name Meaning
Alarm Key Pressed Alarm button is pressed and held down
Alarm Key Action Activated Configured functionality was activated by pressed Alarm button
Alarm Key Action Deactivated Configured functionality was deactivated by pressed Alarm button
Power Key Pressed Power button is pressed and held down
Power Key Action Activated Configured functionality was activated by pressed Power button
Power Key Action Deactivated Configured functionality was deactivated by pressed Power button

Default Configuration LED indications

Name LED, Color & Additional indication
GSM Error GSM
No GPS Fix GNSS
GPS Fix GNSS
Device Off Battery, Vibration
Device On Battery, Vibration
I Am Alive GNSS
Charging Battery
Fully Charged Battery
Charging Error Battery
Battery Low Battery

Note! three LED colors are available - Green, Red and Blue. Indications are fully customizable depending on the user needs.

Retrieved from "https://wiki.teltonika-mobility.com/index.php?title=TMT250_User_interface&oldid=55156"