TMT250 User interface

From Wiki Knowledge Base | Teltonika Mobility
Main Page > Personal Trackers > TMT250 > TMT250 Configuration > TMT250 User interface

Indication is configurable in User Interface tab of configurator or via SMS/GPRS parameter ID. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source (LED or Vibration) then the active indicating scenario needs to be finished first (with exception of Alarm, Power Key Pressed and Device Off scenarios, which can override control of indication sources). An example of indication configuration is given in the picture shown below. Period setting is indicative of Periodic scenarios (refer to the table below) and if Period is set to 0 the indication will take place immediately. If indication is periodic and On parameter value is set to 0, then the indication source will stay on until the scenario is finished. Triggered scenarios will turn on LED and/or Vibration for a configured On duration and then keep them off for a configured Off period of time. In case the configured Repeat value is higher than 0 the device continues On/Off cycle.

Name Type Trigger
GSM Error Periodic When SIM not inserted, is blocked, failed to connect to operator or jammed
GSM Registering Periodic When trying to register to GSM network
SMS Send/Received One Off When SMS is received or sent
Outgoing Call Periodic When outgoing call is in process
Remote Connection Periodic When device is connected to server
Event One Off When eventual record is saved
Panic Event One Off When panic record is saved
No GPS Fix Periodic When device searches valid GPS fix
GPS Fix Periodic When device has valid GPS fix
Device Off One Off When device is turning off
Device On One Off When device turns on
Power Key Pressed Periodic When alarm button is pressed and hold
Power Key Pressed Periodic When power button is pressed and hold
Function Activated One Off Button was triggered with configured function to activate functionality
Function Deactivated One Off Button was triggered with configured function to deactivate functionality
Charging Periodic When device is charging
Fully Charged Periodic When device is fully charged
Pre Alarm Periodic When ManDown functionality starts counting timeout til event
Sleep Mode Periodic When device is in sleep mode
I Am Alive Periodic When configured period passes