TMT250 User interface
Indication is configurable in User Interface tab of configurator or via SMS/GPRS parameter ID. Each 100 ms device checks if any indication is enabled in response to triggered scenarios. If two scenarios need to indicate on the same indication source (LED or Vibration) then the active indicating scenario needs to be finished first (with exception of Alarm, Power Key Pressed and Device Off scenarios, which can override the control of indication sources). An example of indication configuration is given in the picture shown below. Period setting is indicative of Periodic scenarios (refer to the table below) and if Period is set to 0 the indication will take place immediately. When indication is periodic and On parameter value is set to 0, the indication source will stay on until the scenario is finished. Triggered scenarios will turn on LED and/or Vibration for a configured On duration and then keep them off for a configured Off period of time. In case the configured Repeat value is higher than 0 the device continues a periodic On/Off cycle.
| Name | Type | Trigger |
|---|---|---|
| GSM Error | Periodic | When SIM not inserted, is blocked, failed to connect to operator or jammed |
| GSM Registering | Periodic | When trying to register to GSM network |
| SMS Send/Received | One Off | When SMS is received or sent |
| Outgoing Call | Periodic | When outgoing call is in process |
| Remote Connection | Periodic | When device is connected to server |
| Event | One Off | When eventual record is saved |
| Panic Event | One Off | When panic record is saved |
| No GPS Fix | Periodic | When device searches valid GPS fix |
| GPS Fix | Periodic | When device has valid GPS fix |
| Device Off | One Off | When device is turning off |
| Device On | One Off | When device turns on |
| Power Key Pressed | Periodic | When alarm button is pressed and hold |
| Power Key Pressed | Periodic | When power button is pressed and hold |
| Function Activated | One Off | Button was triggered with configured function to activate functionality |
| Function Deactivated | One Off | Button was triggered with configured function to deactivate functionality |
| Charging | Periodic | When device is charging |
| Fully Charged | Periodic | When device is fully charged |
| Pre Alarm | Periodic | When ManDown functionality starts counting timeout til event |
| Sleep Mode | Periodic | When device is in sleep mode |
| I Am Alive | Periodic | When configured period passes |
